1. Overview

        This pump is suitable for filling lubricant into the oil reservoir of 31.5M P a pressure lubrication pump or 40M P a small electric lubrication pump. Because the pump has the characteristics of oil filtration, oil level display and easy operation, it is especially suitable for filling grease to the lubrication pump with no filter device in the oil reservoir supply port.

2.Technical parameters

The medium to be used is a grease with a penetration of not less than 220 (25 ° C, 150g) 1 / 10mm and a lubricant with a viscosity grade greater than N46.

3.Model description

4. the working principle

         When the operating handle moves upward, the volume of the upper cavity of the piston gradually becomes smaller, and the lubricant is sent to the oil reservoir of the intelligent lubrication pump along the conveying hose. Take in the lubricant from the drum. When the handle moves downward, negative pressure is formed in the upper cavity of the piston, the check valve in the lower part is closed, the check valve in the upper part of the piston is opened, and the lubricant enters the upper cavity of the piston. When the handle moves up again, repeat the process.

5.Dimensions

6.instructions for use

1. When in use, one end of the oil delivery hose is connected to the fuel pump outlet and the other end is connected to the oil reservoir replenishment port. After use, the other end should be screwed on the barrel cap bolt.

2.The filter should be cleaned regularly

3. Fat should be added to the barrel in time when the oil level is in the lower position, so as to prevent fat-free air from mixing into the oil reservoir.