I. Conditions of use

YZF-L4 pressure control valve is a signaling device that uses pressure difference signals to be converted into electrical signals through mechanical transmission. It is used in the electric terminal dry oil centralized dry thin oil lubrication system. It is installed at the ends of two oil supply main pipes. When the end pressure of the main oil supply exceeds the set pressure of the valve, the valve action is sent to the electric control cabinet. Signal, the electromagnetic reversing valve realizes the alternate fuel supply of the two fuel supply main pipes. The valve sends the signal correctly and reliably, and the set pressure can be adjusted.

II.Technical Parameters

Grease (NLGI 0 # ~ 2 #) with a penetration of 265 ~ 385 (25 ° C, 150g) 1 / 10mm.

III.Model Description

IV.Dimensions

V.Instructions for use

1. Installed at the end of two oil supply supervisors of the terminal system.

2. After the pressure control valve, a distributor should be installed to update the grease in the valve.

3. The distributor behind the valve is installed with an internal connector and a tee from the pressure gauge interface of the valve body.

4. Turn the adjusting screw to set the pressure to the right and lower to the left.