I. Conditions of use

The dry oil injection control valve is suitable for dry oil injection lubrication systems with air pressure of 0.45 ～ 0.6MP a. It is used to control the dry oil injection nozzles of the oil circuit and air circuit.

The valve is used in conjunction with a dry oil injection nozzle to form a dry oil injection process lubrication device. The connection length between the valve and a manual lubrication pump must not be greater than 1 meter.

II.Technical Parameters

Use a grease with a penetration of not less than 300 (25 ° C, 150g) 1 / 10mm.

III.Dimensions

IV.Instructions for use

1. The grease used must be filtered, uniform in texture, and within the specified penetration range.

2. Pneumatic triple parts must be set in the air inlet pipeline to ensure the clean, dry and balanced pressure of the air.

3. Do not enter the air in the infusion tube to avoid affecting the spray.