CN
干稀油润滑
Your current location : Home >> Product >> Single-line lubrication pump

DB、DBZSingle-line dry oil pump and device

Product properties

  • Category:Single-line lubrication pump
  • Product ID:1571623549
  • Views:0
  • Release date:2020-01-13
  • Product description

1.Overview

      

DB-63 single-line dry oil pump is suitable for single-line small-scale dry oil centralized intelligent lubrication system with low lubrication frequency, nominal pressure of 10MPa, and lubrication point below 80 points, and supplies grease to each lubrication point through a chip oiler .


The DBZ-63 single-line dry oil pump is suitable for lubrication points with long lubrication intervals or scattered equipment. It is directly filled with grease through a grease gun, and is particularly suitable for transportation machinery and equipment in ports and terminals.



2.Technical Parameters


干稀油润滑结构

The medium used is a grease (NLGI 0 # -2 #) with a penetration of 250 to 350 (25 ° C, 150g) 1 / 10mm



3.Dimensions

工艺润滑

智能润滑制造


4.Model label description

干稀油润滑样子



5.Instructions for use

        

1. This type of single-line dry oil pump should be installed in an environment where the ambient temperature is suitable and there is less dust, which is convenient for grease replenishment, adjustment, inspection, maintenance, etc.


2. Add 1 liter of No. 50 mechanical oil to the reduction box before use.


3. For replenishing oil into the oil reservoir, you must use the SJB-D60 manual refueling pump or the DJB-200 electric refueling pump. Add it from the oil filler of the oil reservoir. It is strictly prohibited to start the dry oil pump when there is no grease in the oil reservoir.


4. Connect the motor in accordance with the rotation direction on the motor blade cover, and do not reverse it.


5. The filter at the filler should be cleaned regularly.


6. The pressure regulating valve on the pump body can be adjusted arbitrarily within the range of 0-10MPa, and it is not allowed to exceed the nominal pressure of the pump by 10MPa during use.


7. When the pump has pressure fluctuations and the oil supply is abnormal, you can unscrew the bleed screw on the pump body, wait for the air to discharge, and then tighten the bleed screw when the grease normally overflows outward.


8. The single-line dry oil pump should always be kept clean. It is strictly forbidden to cover the fat supplement to prevent dirt from entering the pump body and affecting normal work.


label

Previous:None

Recently Viewed:

Product center
Dry oil lubrication part
Thin oil lubrication
Smart lubrication
Process lubrication
About us
Company Profile
Honor
Contact us

Address: No.010 Xinglong Road, Huilong Industrial Park, Qidong City

Hotline:0513-83637668 

Company Fax:0513-83637098 

After sales service:0513-83635700

URL:www.qdhsrh.com

Website :en.qdhsrh.com

E-mail:qd3637668@163.com

工艺润滑公司

Scan to learn more