1.Overview

The electric refueling pump is mainly used in a dry oil lubrication system to replenish grease into the oil reservoir of the dry oil lubrication device. This pump is without oil storage barrel, it is directly placed on the 200L oil barrel, it can be operated separately, and it can be connected to the corresponding electric control device to realize the automatic lubrication of the electric lubrication pump system. The pump is a built-in plunger positive displacement pump with stable operation and high output pressure.

2.Technical Parameters

The medium to be used is a grease with a penetration of 265 to 385 (25 ° C, 150g) 1 / 10mm and an industrial lubricant with a viscosity grade greater than N46.

3.Model Description

4.Dimensions

5.working principle

        The worm gear is driven by a vertically installed motor through a worm. An eccentric shaft is mounted on the end surface of the worm gear. The plunger is reciprocated up and down by a crank link. The piston and the valve inside the cap complete the suction and pressure processes. The oil hose is transported outwards.

6.Instructions

1. Rotate the wire in the direction of the arrow.

2. The delivered intelligent grease must be clean, uniform in texture and within the specified viscosity range.

3. Before the first use, lubricating oil (N220) should be injected into the gearbox to the specified oil level.

4. After the petrol pump is started for the first time, the air release valve should be opened first, and then closed after normal oil discharge.

5. Do not run dry without oil in the barrel.

7.download Google

If you need an oil storage tank or barrel cap, you must specify it in the contract when ordering.