1.Overview

It is suitable for filling the oil reservoir of the electric lubrication pump with grease in the dry oil centralized lubrication system. This pump is without oil storage barrel, placed directly on the 200L oil barrel, can be operated separately, and connected to the corresponding electric control device can realize automatic grease replenishment of the electric lubrication system. This pump is a built-in plunger positive displacement pump, which adopts worm gear and worm gear to reduce the speed of transmission. It has stable operation and high output pressure. A pressure regulating safety valve at the outlet has overload protection.

2.Technical Parameters

Applicable medium is 265 ~ 385 (25 ° C, 150g) 1 / 10mm grease (NLGI0 # ~ 2 #)

3.Model Description

Introduced models：BA-2

4.Dimensions

5.Action description

The vertically mounted motor drives the worm gear to rotate through the worm. An eccentric shaft is installed on the end surface of the worm gear. The plunger is reciprocated up and down by the crank link. The oil hose is transported outwards.

6.Instructions for use

1. It is recommended to rotate the wire in the direction of the arrow.

2. The smart grease used must be clean, uniform in texture and within the specified viscosity range.

3. Before the first use, lubricating oil (N220) should be injected into the gearbox to the specified oil level.

4. After the petrol pump is started for the first time, the air release valve should be opened first, and then closed after normal oil discharge.

5. Do not run dry without oil in the barrel.