I. Overview

KS series two-line distributor is suitable for two-line dry oil centralized lubrication system with a nominal pressure of 20MPa. As a metering oil supply device, it is directly controlled by the oil supply pressure under the action of the alternate oil supply pressure of the two oil supply main pipes. The piston actuates the oil to complete the function of quantitatively distributing grease to the lubrication point.

The oil outlets of this series of double-line distributors are evenly distributed on the bottom surface. The forward and reverse movements of the distributor piston discharge process grease from the same oil supply port. You can also directly observe the operation of the distributor from the action of the indicator rod, and at the same time, It is convenient to adjust the oil supply amount of each oil outlet within the specified range by adjusting the screw.

II.Technical Parameters

Applicable medium is 1 / 10mm grease (NLGI 0 # ~ 1 #) with a penetration of not less than 295 (25 ° C, 150g) or a lubricant with viscosity class greater than N68; using ambient temperature. It is -10 ℃ ～ + 80 ℃, when the medium is lubricating oil, it can be used under 10MPa pressure.

III.Model Description

IV.Dimensions

There is only one mounting hole for KS-32; the size of KS-62-1 is the same as that of KS-62, but there is no oil outlet in the B size position.

V.Download Google

The installation and use of the ambient temperature outside -10 ℃ ～ + 80 ℃ must be specified in the order contract, so that low-temperature and high-temperature oil seals can be used when supplying.