I. Conditions of use

VW series distributor is suitable for dual-line dry oil centralized lubrication system with nominal pressure of 20M Pa. Under the action of the alternate oil supply pressure of the two oil supply main pipes, the piston is directly controlled by the oil supply pressure to feed the oil, and the function of quantitatively distributing grease to the lubrication point is completed.

This type of double wire distributor is provided with oil outlets on the upper and lower sides, and the distributor piston moves forward and backward to discharge process lubricant from the upper and lower oil outlets respectively. You can also directly observe the working condition of the dispenser from the action of the indicating rod, and at the same time, you can easily adjust the oil output of each oil outlet through the adjustment screw within a specified range.

II.Technical Parameters

The medium used is 1 / 10mm grease (NLGI 0 # ~ 1 #) with a penetration of not less than 265 (25 ° C, 150g) or a lubricant with a viscosity grade greater than N68. Use environment temperature . The temperature is -10 ° C to + 80 ° C. If the working medium is lubricating oil, it must be used under 10MPa pressure.

III.Model Description

IV.Dimensions

V.Instructions for use

1.The specified medium must be used in the specified environment.

2. Use it in dusty, humid, and harsh environment.

3. The adjustment of the oil supply should be carried out with the indicator rod retracted. After the adjustment, tighten the locking screw.

4. There is a two-in-one oil outlet structure between the corresponding oil outlets on the top and bottom of the distributor, which can easily change the odd number of oil outlets. When using, you only need to unscrew the screws in the hole, and use the R1 for the unused outlet / 4 Plug the plug.

5. The surface in contact with the distributor should be smooth and flat, and the mounting bolts should not be over-tightened, so as not to affect the normal operation.

VI.Download Google

The ambient temperature of the distributor outside -10 ℃ ～ 80 ℃ must be specified in the order contract, so that low-temperature and high-temperature oil seals can be used when supplying.