1.Overview

KW series two-line distributor is suitable for two-line dry oil centralized lubrication system with a nominal pressure of 20M Pa. It is directly controlled by the supply pressure control piston under the action of the alternate supply pressure of the two supply main pipes. , To complete the function of quantitative distribution of grease to the lubrication point.

This series of dual-line distributors are provided with oil outlets on the front, upper and lower sides, which are bi-directional oil outlets. The upper row on the front is connected to the corresponding oil outlet on the upper side, and the lower row on the front is connected to the corresponding oil outlet on the lower side. The direction needs to be arbitrarily selected. The forward and reverse movements of the distributor piston respectively discharge the process grease from the upper and lower oil outlets once. In order to increase the amount of oil to be doubled, it is easy to change the odd number of oil outlets. It also has a two-in-one structure. When using, you only need to unscrew the screws in the lower outlet, and the unused outlets can be blocked with R1 / 4 plugs. K W series double wire distributor can directly observe the working condition of the distributor from the action of the indicator rod, and can also easily adjust the oil supply amount of each oil outlet within the specified range by adjusting the screw.

2.Technical Parameters

Use a medium penetration of not less than 295 (25 ° C, 150g) 1 / 10mm grease (NLGI 0 # ~ 1 #) or a lubricant with a viscosity grade greater than N68;-10 ℃ ～ 80 ℃; when the medium is lubricating oil, please use it below 10MPa.

3.Model Description

4.Dimensions

5.Download Google

The installation and use of the ambient temperature outside -10 ℃ ～ 80 ℃ must be specified in the order contract, so that low-temperature and high-temperature oil seals can be used when supplying.