1.Conditions of Use

VS series two-line distributor is suitable for two-line dry oil centralized lubrication system with nominal pressure of 20MPa. Under the action of the alternate oil supply pressure of the two oil supply main pipes, the piston is directly controlled by the oil supply pressure to feed the oil, and the function of quantitatively distributing grease to the lubrication point is completed.

The oil supply ports of this series of double-line distributors are at the bottom. The forward and reverse movements of the distributor piston discharge process grease from the same oil supply port. You can also directly observe the operation of the distributor from the action of the indicator rod. The adjustment screw can easily adjust the oil supply amount of each oil supply port within the specified range.

2.Technical Parameters

The applicable medium is 1 / 10mm grease (NLGI 0 # ~ 1 #) with a penetration of not less than 265 (25 ° C, 150g) or a lubricating oil with a viscosity grade greater than N68. When the medium is lubricating oil, it can be used under 10MPa pressure

3.Dimensions

4.Instructions for use

1. The specified medium must be used in the specified environment.

2. Use it in dusty, humid, and harsh environment.

3. The adjustment of the oil supply should be carried out with the indicator rod retracted. After the adjustment, tighten the locking screw.

4. The surface in contact with the distributor should be smooth and flat, and the mounting bolts should not be overtightened, so as not to affect the normal operation.

5.Model Description

6.download Google

The ambient temperature of the distributor outside -10 ℃ ～ + 80 ℃ must be specified in the order contract, so that low-temperature and high-temperature oil seals can be used when supplying.