1.Conditions of Use

VSL-KR double-line distributor has oil supply ports on the top and bottom. When the piston of the distributor moves forward and backward, the grease is discharged from the top and bottom oil supply ports respectively; For an oil drain structure, to change the odd oil output, just screw out the screw in the hole. You can also directly observe the working condition of the distributor from the action of the indicating rod, and at the same time, you can adjust the oil supply amount of each oil outlet within the specified range by adjusting the screws.

This type of distributor is suitable for a dual-line dry oil centralized lubrication system with a nominal pressure of 40 MPa. Under the action of the alternate oil supply pressure of the two oil supply main pipes, the oil supply pressure directly controls the piston action to supply oil to complete the process lubrication The function of point-dispensing grease.

2.Technical Parameters

3.Model label description

4.Dimensions

5.Instructions for use

If the corresponding upper and lower outlets need to be combined, you only need to unscrew the compression plug in the upper oil outlet with a 6mm hex wrench, remove the through hole of the oil separation sleeve and install it, and then tighten the compression plug. The upper outlet is blocked with a G1 / 4 screw plug to prevent dust from entering.

6.download Google

The ambient temperature outside the installation and use of the distributor must be specified in the order contract in order to provide low-temperature and high-temperature oil seals when supplying.