1.Overview

     K J, K M, K L series single-line progressive distributors are suitable for the occasions where the lubrication points are dense, the grease consumption is different, and the oil is frequently fed to the single-line centralized dry thin oil lubrication system.

KJ, KM, KL series single wire progressive distributor, it is made of medium carbon alloy structural steel supply body, end body and 3 ~ 8 pieces of intermediate combination of oil supply quantity and oil outlet number determined according to design needs Made. The normal outlet of the distributor is set on both sides of the distributor, and there are also prepared outlets. The check valve is installed in the oil outlet of each intermediate, which can completely prevent the back flow of grease due to the back pressure of the lubrication point. It ensures the quantitative and accurate oil supply of each oil outlet.

2.Technical Parameters

Applicable medium is grease with a cone penetration of not less than 265 (25 ° C, 150g) 1 / 10mm or lubricating oil with viscosity grade greater than N120: applicable ambient temperature is -10 ° C to 80 ° C.

3.Action description

4.Dimensions

5.Model Description

Spit exit mark description:

T: Basic type, there are two outlets from the two sides of the intermediate

oil.

S: There is only one outlet (T-type two outlets are connected), and the oil volume is T-type

It is twice as much as oil on the left or right.

L C: There is no left exit. The left exit and the adjacent ones are seen from the direction of oil inlet.

The next piece of export is combined with oil.

R C: There is no right exit. From the direction of oil inlet, the right exit is adjacent to the adjacent one.

The next piece of export is combined with oil.

2C: No exit, both left and right exits are adjacent to the next exit.

And the amount of oil.

6.Overpressure indicator

Installed in the preparation outlet of the distributor, when the lubrication point or pipeline is blocked

When the pressure rises more than the specified value, the outside of the indicator slightly protrudes. Through system

The fault signal sent by the system can be checked directly if the on-site search indicator is extended.To the blocked area.

7.Overflow indicator

Prepared for each distributor installed in a harsh environment and prone to clogging

At the outlet, when the lubrication point or the pipeline is blocked, the pressure rises abnormally.

At the specified value, the grease supplied from the blocked point of the distributor overflows from the overflow port

Out, the overflow point is the blocked fault point.

It is only suitable for continuous working parts and must not affect the movement of other distributors For occasions.

8.Download Google

When ordering, use the complete model and provide the connection diagram.

Example: KM-3 (15T + 25T2C + 30S) R