I. Conditions of use

Applicable to the large-scale open gears of metallurgy, mining, cement, chemical industry, papermaking and other industries (such as ball mills, rotary kilns, excavators, blast furnace distributors, etc.) as well as the process lubrication of steel wire ropes and chains. It has the characteristics of spraying the lubricant beyond a certain space, directed, quantitatively and uniformly onto the friction surface.

II.Technical Parameters

The medium used is a grease with a penetration of 265 to 385 (25 ° C, 150g) 1 / 10mm (NLGI 0 # to 1 #) or an industrial lubricant with a viscosity grade greater than N120.

III.Dimensions

IV.Instructions for use

1. The grease used must be filtered, uniform in texture, and used within the specified cone penetration and viscosity grade range.

2. Pneumatic triple parts must be set in the air inlet pipeline to ensure that the air is clean, dry and balanced.

3. Do not enter the air in the infusion tube to avoid affecting the spray.