I. Overview

It is suitable for the lubrication of large open gears (such as ball mills, rotary kiln, excavators, blast furnace distributors, etc.) and steel wire ropes and chains in metallurgy, mining, cement, chemical, papermaking and other industries. It has the characteristics of spraying lubricant beyond a certain space, directionally, quantitatively and uniformly sprayed onto the friction surface for process lubrication.

II.Technical Parameters

The medium used is a grease with a penetration of 310 to 400 (25 ° C, 150g) 1 / 10mm (NLGI0 # to 1 #) or an industrial lubricant with a viscosity grade greater than N120.

III.Dimensions

IV.Instructions for use

1. The grease used must be filtered, and the grease or oil with uniform texture and within the specified range.

2. Pneumatic triple parts must be set in the air inlet pipeline to ensure the clean, dry and balanced pressure of the air.

3. Do not enter the air in the infusion tube to avoid affecting the spray.