1.Conditions of Use

VSN-KR double-line distributor has oil outlets on the upper and lower sides. When the piston of the distributor moves forward and backward, the grease is discharged from the upper and lower oil outlets respectively. You can also directly observe the operation of the distributor from the action of the indicator rod. In some cases, the oil supply amount of each oil outlet can be adjusted within the specified range by adjusting screws.

This type of distributor is suitable for a two-line dry oil centralized process lubrication system with a nominal pressure of 40MPa, as a metering oil supply device. Under the action of the alternate oil supply pressure of the two oil supply main pipes, the oil supply pressure is directly controlled by the oil supply pressure to control the piston action to complete the function of quantitatively distributing grease to the lubrication point.

2.Technical Parameters

The medium to be used is a grease (NLGI 0 # ~ 2 #) with a penetration of not less than 265 (25 ° C, 150g) 1 / 10mm or a viscosity grade greater than N68; the use environment temperature.The temperature is -10 ～ 80 ℃; if the medium is lubricating oil, please use it under 20MPa pressure.

3.Model label description

4.Dimensions

5.ordering instructions

The installation and use of the ambient temperature outside -10 ~ 80 ℃ must be specified in the order contract, in order to provide low-temperature, high-temperature oil seals.