1.Overview

The chip oiler is suitable for the dry oil centralized lubrication system of small machinery and equipment. It is used with single-line dry oil pump or multi-point dry oil pump to form a single-line centralized dry thin oil lubrication system, which can automatically timing and quantify up to about 100 lubrication points Ground supply grease. Each oiler is provided with an indicating device to check the oil output in time.

2.Technical Parameters

3.Dimensions

Use a grease with a penetration of not less than 265 (25 ° C, 150g) 1 / 10mm.

4.Instructions for use

1. The oil output condition of the oil feeder can be checked by observing and indicating device, and it can also be installed with electric travel switch to monitor.

2. If the amount of grease required by some lubrication points is greater than the values listed in the table, you can combine the oil feeders arbitrarily (see the attached picture). Double the oil supply.